Mogami multicore cables are designed for the highestlevelof audio performance and feature superb electrical andmechanicalcharacteristics while remaining compact, superflexible andeasy to use.

• Individually twisted shielded pairs, available in 2 to48channels.
• XLPE (Cross Linked Polyethylene) insulation providessuperbelectrical characteristics and will not melt or shrink backduringsoldering.
• Rugged and flexible construction that is easy tohandle,even at temperatures down to -20°C (-4°F).
• Easy cable identification system:
  • Channel numbers are printed and underlined on eachcorejacket to ensure correct identification, regardless of which endisstripped.
  • Outer jackets of each pair are colour coded bystandardresistor colour code, allowing quick identification ofconductor pairs.
  • Inner conductors are also colour coded based ontheinternational standard resistor colour code. Each pair is colourcodedby jacket and conductor colour combination.
• Each channel has a drain wire and served (spiral)barecopper shield. The drain wire simplify termination and can becrimpedby the same size contact as the inner conductor pair.
• CL2 rated version available. Conductor size of CL2ratedversion is thicker #25AWG so that it is also recommended forruggedapplication and firm and easier crimp terminal connector wiringas wellas NEC fire regulation requirement.

STANDARD VERSION

Part No.	No. of Channels	Ov. Dia. (Approx. mm)	Jacket Thickness (Approx. mm)	Weight (kg/100m)(kg/328Ft)	Maximum Length available
W2930	2-ch	7.5(0.295")	1.0(0.039")	7	506m (1,659Ft)
W2931	4-ch	8.6(0.339")	1.0(0.039")	9
W2932	8-ch	11.5(0.453")	1.2(0.047")	18
W2933	12-ch	14.3(0.563")	1.5(0.059")	28
W2934	16-ch	15.8(0.622")	1.5(0.059")	32	305m (1,659Ft)
W2935	19-ch	17.0(0.669")	1.7(0.067")	40
W2936	24-ch	20.0(0.787")	2.0(0.079")	46
W2937	27-ch	20.5(0.807")	2.0(0.079")	58
W2938	32-ch	21.7(0.854")	2.0(0.079")	63
W2939	48-ch	26.0(1.02")	2.0(0.079")	97	200m (656Ft)

CABLE CORE SPECIFICATIONS Conductor 30/0.08A(0.15mm²)#26AWG            (30×#40AWG) Insulation 1.0Ø XLPE (CrossLinkedPolyethylene)      (0.039") Drain Wire 7/0.18TA(0.18mm²)#25AWG              (7×#33AWG) Served Shield Approx. 58/0.10A Served (spiral) Shield Jacket (Covering) 2.8ØFlexiblePVC                                            (0.110") Identification See core number identification table

Figure (1)

ELECTRICAL & MECHANICAL CHARACTERISTICS

DCResistanceat 20°C	Inner Pair Conductor	0.13W/m(0.040W/Ft)
	Shield	0.031W/m(0.0095W/Ft)
Capacitanceat1kHz, 20°C (Partial Capacitance Value) See Figure (1)	K0	130pF/m(40pF/Ft)
	K1	12pF/m(3.7pF/Ft)
Inductance		0.6µH/m(0.18µH/Ft)
ElectrostaticNoise(Hum Pick-up)*		2.5mV Max.
ElectromagneticNoiseat 10kHz*    (Inductance of the toroidal core: 595µH)		0.1mV Max.
Microphonics*    Method: Stepping on cable		50mV Max. at 50kWLoad
VoltageBreakdown		Must withstand at DC 500V/15sec.
InsulationResistanceat DC 125V, 20°C		100000 MW×m Minimum
TensileStrengthof one pair (26°C, 65% RH)		274N
Emigration		Non-emigrant to ABS resin
ApplicableTemperature		-20°C~ +70°C(-4°F~+158°F)
Standard		UL13 CL2X 60°C / UL 20002 AWM30V60°C VW-1

* Using standard testing methods of Mogami Wire &CableCorp.

CL 2 RATED VERSION

Part No.	No. of Channels	Ov. Dia. (Approx. mm)	Jacket Thickness (Approx. mm)	Weight (kg/100m)(kg/328Ft)	Maximum Lengths available
W3040	2-ch	7.8(0.307")	1.0(0.039")	8	305m (1,659Ft)
W3041	4-ch	9.0(0.354")	1.0(0.039")	10
W3042	8-ch	12(0.472")	1.2(0.047")	19
W3043	12-ch	14.6(0.575")	1.3(0.051")	29
W3044	16-ch	16.3(0.642")	1.4(0.055")	36
W3045	19-ch	17.5(0.689")	1.7(0.067")	44
W3046	24-ch	20.5(0.807")	2.0(0.079")	57
W3047	27-ch	21.0(0.827")	2.0(0.079")	63
W3048	32-ch	22.4(0.882")	2.0(0.079")	73
W3049	48-ch	27.0(1.063")	2.0(0.079")	104	200m (656Ft)

CABLE CORE SPECIFICATIONS Conductor 7/0.18A(0.178mm²)#25AWG                (7×#33AWG) Insulation 1.05Ø XLPE (CrossLinkedPolyethylene)   (0.0413") Drain Wire 7/0.18A (Exactly same as conductor) Shield Approx. 58/0.10A Served (spiral) Shield Jacket (Covering) 2.8ØFlexiblePVC                                             (0.110") Identification See core number identification table

Figure (2)

ELECTRICAL & MECHANICAL CHARACTERISTICS

DCResistanceat 20°C	Inner Pair Conductor	0.11W/m(0.0336W/Ft)
	Shield	0.031W/m(0.0095W/Ft)
Capacitanceat1kHz, 20°C (Partial Capacitance Value) See Figure (2)	K0	140pF/m(42.7pF/Ft)
	K1	12pF/m(3.7pF/Ft)
Inductance		0.6µH/m(0.18µH/Ft)
ElectrostaticNoise(Hum Pick-up)*		2.5mV Max.
ElectromagneticNoiseat 10kHz*    (Inductance of the toroidal core: 595µH)		0.1mV Max.
Microphonics*    Method: Stepping on cable		50mV Max. at 50kWLoad
VoltageBreakdown		Must withstand at DC 500V/15sec.
InsulationResistanceat DC 125V, 20°C		100000 MW×m Minimum
TensileStrengthof one pair (26°C, 65% RH)		274N
Emigration		Non-emigrant to ABS resin
ApplicableTemperature		-20°C~ +70°C(-4°F~+158°F)
Standard		UL13 CL2 60°C

* Using standard testing methods of MogamiWire& Cable Corp.

CORE NUMBER IDENTIFICATION TABLE

Core No.	Color of One of the Pair	Core Jacket Color	Core No.	Color of One of the Pair	Core Jacket Color	Core No.	Color of One of the Pair	Core Jacket Color
1	Brown	Black (White)	17	Purple	Brown (White)	33	Orange	Orange (Black)
2	Red		18	Gray		34	Yellow
3	Orange		19	White		35	Green
4	Yellow		20	Black	Red (White)	36	Blue
5	Green		21	Brown		37	Purple
6	Blue		22	Red		38	Gray
7	Purple		23	Orange		39	White
8	Gray		24	Yellow		40	Black	Yellow (Black)
9	White		25	Green		41	Brown
10	Black	Brown (White)	26	Blue		42	Red
11	Brown		27	Purple		43	Orange
12	Red		28	Gray		44	Yellow
13	Orange		29	White		45	Green
14	Yellow		30	Black	Orange (Black)	46	Blue
15	Green		31	Brown		47	Purple
16	Blue		32	Red		48	Gray

• Colour identification is based on the resistor colour code.
• Colours indicated in parenthesis indicate the printcolouron the core jacket.
• Insulation colour of other wire in all pairs is clear.
• Colour of outer cable jacket is black.
• How to read core jacket channel numbers
  Each number printed on the core jacket is underlined (as shown below)inorder to prevent mis-reading of cable numbers.

EXAMPLE

1)

means SIX

2)

means NINE

3)

means EIGHTEEN, not EIGHTY-ONE

ASSEMBLY OF SNAKE CABLE

• Customised connections and cable assemblies are availabletospecial order.
• Connection diagram and detailed specification sheetarenecessary for all order.
• Delivery: 4 weeks excluding shipping time.